GE SmartWater Replacement Reverse Osmosis Filters (FX18P) Review

Average Reviews:

(More customer reviews)This is review of "Non-Watts Premier Brand RO Membranes" like this one. While it should work as described, DO NOT USE on Watts Premier WP systems (i.e. WP-4V, WP-4, WP-5). The WP systems are the one-piece manifold systems from Watts Premier.
This does not have the built-in Check Valve or Brine Seal inside the white plastic tube of the RO Membrane. Without this Check Valve or Brine Seal, water from the reservoir tank (when full) will back flow to the RO membrane and damage it, and waste water.
This back flow or reverse flow will happen when your reservoir tank gets full. So basically, you will be wasting water as the water trickle will not stop. When I tested it, water continued to trickle out of the reject water outlet tube even when my reservoir tank is full already (it should stop when reserve tank is full). The water coming out is at a much slower rate though, but still plenty enough to raise your water bill since the water trickle will continue 24 hours a day.

Click Here to see more reviews about: GE SmartWater Replacement Reverse Osmosis Filters (FX18P)

The GE SmartWater replacement reverse osmosis filter set (FX18P) fits the following GE 18 gallon per day reverse osmosis drinking water systems: PNRV18Z, PNRV18ZBL, PNRV18WH, PNRV18BB, PNRV18ZWW, and PNRV18ZCC. When installed in a PNRV18Z, this GE reverse osmosis filter set reduces: Arsenic, Chromium, Lead, Cysts, Sodium, Sulfate, Ammonia, Nitrate/Nitrite, Tannins, Copper, Magnesium, Chlorine (Taste and Odor), Sediment, and Rust. GE recommends that you replace the filter every 6 months OR after 900 Gallons of water have been filtered OR if your system monitor lights indicate replacement is required OR if you notice a decrease in the flow of water or objectionable tastes in the water.

Buy cheap GE SmartWater Replacement Reverse Osmosis Filters (FX18P) now.